Photography Lighting Equipment

Elinchrom EL 20744 Elinchrom Digital Style 600RX Flash 2 Monolight Kit.

Includes Kenko KCM-3100 Professional Digital Color Temperature Flash and Ambient Light Meter, Neck Strap, Case. * Kenko KCM-3100 Professional Digital Color Temperature Flash and Ambient Light Meter. * Features: * The KCM-3100's uncluttered control button layout and large easy-to-read LCD make using the meter much easier than other options on the market today. * The KCM-3100 has 3 display modes for diplaying color temperature. Each mode is designed for a certain type of photography or filtering system. * LB_(Light Balancing) LB_index is used to select the necessary amber or blue LB_filter. The Mired difference between the specific photographic color temperature for the selected film type and the light source. * CC (Color-Correction) displays the Kodak" filter number(s) of the necessary light-balancing filter(s) to make for easy selection of the required light balancing filter. Where as the LB system uses Amber or blue filters, the CC system uses Magenta or Green color compensating filters. * Photographic color temperature in degrees Kelvin. This is a useful setting to determine filtration based on the light source and the spectral sensitivity of the film used. * The ability to take ambient and flash light readings using either a sync cord or non-cord. Using a sync cord, the flash is fired when the reading button is pushed. In the non sync cord mode, pushing the reading button puts the meter in a stand-by mode and when the flash is fired the meter displays those readings. * "Analyzer Mode'' for measurement of Flash lighting only. Setting the shutter speed to "F'', the meter will only read light from flash. * 9 memory channels for customizing the meter to your equipment and materials- All film and equipment manufacturers claim that their products are calibrated or balanced to "daylight'' (5500K) or tungsten (3400K or 3200K), but in the real world these number are often not 100% accurate. * Film can vary from batch to batch and light bulbs and flash tubes can have slight shifts in color over time. * Once these differences are determined, The KCM-3100's 9 memory channels allow the photographer to enter custom setting based on the situations or individual film characteristics they are working with. * Once the data is entered and stored, the meter will adjust future readings accordingly. * Specifications: * Type: Three-color hand-held digital color meter for color photography; Determines photographic color temperature of light sources and filtration required. * Reception Method: Incident-light reading. * Receptors: Incident- flat diffuser, Rotating receptor head 90 right/ 180 left. * Receptor Elements: 3 Silicon photocells filtered red, green, blue sensitivities. * Measuring Modes: AMBI - Ambient light, CORD- Flash with sync cord, NON-CORD- Flash without sync cord. * Measuring Range: Ambient light- EV 3.0 to 16.3, Flash- F/2.8 to 180 in two ranges. * Shutter Speed Setting: * Range (for Flash): 1/500 sec. to

Light for photography is not only defined by its light intensity and luminance, but also by its color composition. The Color-Pro 3F is specifically designed for measuring the photographic color temperature of flash and ambient light, and to indicate the battery:9-Volt battery sizesensor type:sbc photodiode -swivel head sensorflash:pc cord and sensor flashambient light: LC DisplayLC Display - The large LCD is easy to read, giving all the relevant and important data.Calculates Filter ValuesCalculates Filter Values - Resulting filter values can be expressed as light balan Repeat accuracyIncredibly consistentVery PortableIntuitive operationCompact size Lighting equipmentBroadcastGaffers/GripProfessionalHDVCinematographerIndustrialEventsProduction SetsFilter CorrectionCinematic

PENTAX ELECTRONIC FLASH FOR DSLR. *High guide number for increased range and versatile performance *P-TTL mode with pre-flash allows for more accurate strobe photography *LCD shows the effective range of the flash in P-TTL, TTL and auto modes *Auto-focus assist beam for focusing in low light or low contrast situations *Uses 4 AA batteries *Includes case

Elinchrom EL 20726 Elinchrom Style 600RX 600WS Digital Studio Light provides ultra consistent performance for every digital application (QuickTime VR, Multi and Single shot digital imaging). Rapid re-cycling times. Interface for

Includes Gossen Starlite 2 Multifunction Cine Ambient Lightmeter Flashmeter - Gossen GO 4046, Carrying case, strap, battery, operating instructions. * Gossen Starlite 2 Multifunction Cine Ambient Lightmeter Flashmeter - Gossen GO 4046. * FEATURES: * Retractable diffusor. * Measuring probe can be rotated 270O. * Optical viewfinder. * Compact, splash-proof housing. * Display with automatically activated illumination. * Border made of rubberized material in proximity to the handle. * Second ISO value can be activated, direct conversion based on ISO. * SPECIFICATIONS: * Measuring principles: Incident and reflected light. * Lightsensor: Two color corrected silicon photo diodes. * Incident: Adjustable to flat or spherical diffusor characteristics. * Reflected: Measuring angle adjustable 1 degrees or 5 degrees, viewing field 12 degrees. * Ambient: * Incident light metering LW-2,5 to LW +18. * Reflected light metering 5 degrees LW 0 bis LW +18. * Reflected light metering 1 degrees LW 2 bis LW +18. * Flash: * Incident light metering f/1,0 bis f/128. * Reflected light metering 5 degrees f/1,4 bis f/128. * Reflected light metering 1 degrees f/2,8 bis f/128. * Functions: * Brightness contrast. * Subject contrast. * Averaging. * Zone metering. * 9 memeory slots each for flash and ambeint. * Multiple flash calculation. * Readout of the share of the ambient light when flash metering. * Flash contrast measurement and averaging. * Automatic display illumination at EV 4 or lower (10 sec.). * Dual ISO. * Automatic cut off after 2 minutes (Values retained in memory). * Photography: * Film speeds ISO 3/6 degrees to 8000 / 40 degrees in 1/3 steps. * Shutter speeds (ambient) 1/8000 s bis 60 min. in full Time Values or half TV. * Cine-Speeds 8, 12, 16, 18, 24, 25, 30, 32, 50, 64 (2, ,3, 4, 6, 36, 40, 48, 60, 72, 96, 120, 128, 150, 200, 240, 255,. * 300, 360)*. * Flash sync speeds (Torzeiten) 1/1000 to 1 sec in 1 TV (1/2 TV)*. * Apertures f/0,5 to f/128, digital in full stops + 1/10, analog in full stops + 1/2. * Corrections, Extensions factors 1,0 to 955 VFX. * Speicheranzeige 0 to 9. * Analog scale f/1,0 to f/128 in AV, zone 0 to zone X. * Photometry: * Light intensity 0,5 bis 199900 lx (0,05 bis 50000 fc)*. * Luminance 0,2 bis 30000 cd/m2 (0,05 bis 9000 fL)*. * Flash light intensity 2,0 bis 30000 lx*s (0,2 bis 3000 fc*s)*. * Flash luminance 0,3 bis 1800 cd*s/m2 (0,1 bis 500 fL*s)*. * Others: * Battery 1.5 V Mignon. * Operating temperature range -10 degrees C bis 50 degrees C. * Storage temperature -20 degrees C bis 60 degrees C. * Dimensions Approx. 164 x 66 x 26 mm. * Weight (without battery) Approx. 195 g. Full Manufacturer Warranty

Elinchrom EL 20101 Elinchrom Free Lite A 2400WS Battery-Powered Studio Light Lamphead.

Elinchrom EL 20725 Elinchrom Style 300RX 300WS Digital Studio Light provides ultra consistent performance for every digital application (QuickTime VR, Multi and Single shot digital imaging). Rapid re-cycling times. Interface for

The SubStrobe DS-125 features special electronic circuitry for use with the newest cameras, providing both TTL capability and the ability to also provide preflashes when used with Ikelite Wireless TTL Slave Sensors. The DS-125 Digital was created especially for use with new digital cameras, but is completely compatible with current film cameras including the Nikonos and all of the newest Nikon System. Requires the use of a Charger and either the #4100.5 Remote TTL Sensor or any of the applicable sync cords can be utilized. Also requires the use of a Strobe arm. Complete systems are available. See under recommended accessories for the list of packages Item Includes #4066 NI-MH Battery Pack, Requires Charger Sold Separately. Key Features *TTL, Full, 1/2, 1/4, 1/8 powers *Fuel Gauge *Modeling Light *Audible Ready Signal *1.5 hr Smart Charger available as an option *Interchangeable NiCad battery pack *Guide # 32 underwater (ISO 100) Specifications *Energy Rating - 110 watt-seconds *Coverage Angle - 90 degrees with Diffuser to cover 100 degrees *Color Temp - 4800 degrees Kelvin *Flashes - 150 Full Power per charge *Recycle Time - 1 second *Power Source - #4066 NiCad batteries (incl) *Size - 3.75" x 7" *Weight - 2.75 pounds

Includes Kenko KFM-2100 Professional Incident Flash Meter. * Kenko KFM-2100 Professional Incident Flash Meter With Integrated Spot Flash Ambient Readings. * Features: * The KENKO KFM-2100 light meter is a robust, expertly designed and full-featured meter for the demands of professional photography. * It's ergonomic design and logical control layout will please photographers who want to concentrate on the subject, not their equipment. * The KFM-2100 will read ambient and flash light. For flash, the meter has settings for both cord and non-cord triggering. * An integrated spot meter makes spot readings in both ambient and flash modes fast and easy with no need to stop and add accessories. * Large, easy-to-read vertical LCD_that displays F No. values both numerically in 1/10 stop increments with large numbers and in a more common 1/3 stop increments on a vertical scale running up the long side of the LCD. * Excellent clear-view viewfinder with F No. read-out in the viewfinder to read reflected light without having to look away from the scene. Dioptric adjustments are built-into the viewfinder. * Advanced in-meter exposure evaluation tools. * The KFM-2100 has an Exposure navigation system, allowing the photographer to easily confirm the exposure for each part of the subject or scene displayed on the LCD_to assist in determining the best exposure. * Useful in mixed flash/ambient lighting situations, the "Analyze'' function can determine the ratio of ambient to flash light in a scene. This feature is very handy in scenes where a flash is being used to "open up'' a shadowed area left by ambient (natural) light. * The meter's "Calculation'' function can be used to average measurements that have been stored in memory, very useful in reflected light measurements to capture highlight or shadow detail more accurately. * The KFM -2100 has the ability to store up to 9 measurements that can be recalled for reference or for averaging. Just press the "M'' button after each reading to store it in memory. If the memory reaches its maximum, it will delete the oldest reading to store the current information. * Latitude Display Function for film or digital, useful for scenes with a large brightness difference between light and dark areas. * Specifications: * Type: Hand-held digital Exposure meter for ambient and flash light. * Reception Method: Incident-light readings and spot reflected light readings. * Receptors: Incident- Spherical diffuser, 270 Rotating receptor headSpot- Spot optical system built-in to viewfinder with 1 measurement angel.Capable of displaying data on ambient and spot measurements simultaneously. * Receptor Elements: Silicon photocell. * Measuring Modes: AMBI- Ambient light. CORD- Flash with sync cord. NON-CORD- Flash without sync cord. * Measuring Range: * Ambient light: Incident: EV -2.0 to 19.9. Spot: EV 2.0 to 24.5. * Flash: Incident: F No. 1.0 to 128 +0.9 stop. Spot: F No. 2.8 to 128 +0.9 s

This exciting lighting package includes the Sea and Sea YS-27DX strobe, designed for multipurpose underwater photography. The light level control dial of the YS-27DX has nine different manual light level controls which helps you get just the right amount of light for the subject at hand. This strobe is compatible with most digital cameras that have a pre-flash and an optional fiber optic cable accurately synchronizes the strobe with your digital camera`s built-in flash. Features: *Takes four AA batteries - alkaline, Oxyride, or Nimh *Approximate number of flashes - 350 alkaline, 420 Oxyride, 490 Nimh *Approximate recycle time - 2.5 sec. alkaline, 2 sec. Oxyride, 2 sec. nimh *Color temperature-amp-nbsp;5500K (5200 with diffuser)-amp-nbsp; *Depth rated to 200 feet (60 meters) *Over-pressure relief valve *Slave function with pre-flash control or manual in 9 steps *Sea Arm Light Single Set made of glass fiber fortified nylon Includes: -amp-nbsp;YS-27DX strobe head, arm fixing bolt, Sea Arm Light Single Set, diffuser, fiber optic cable, silicone grease, 2 AA alkaline batteries, O-ring-amp-nbsp; -amp-nbsp; **Divers Direct recommends you purchase flood insurance from or equipment protection programs for any photo or video system. View our full selection of

DSLR Flash *High guide number for increased range and versatile performance *P-TTL mode with pre-flash allows for more accurate strobe photography *LCD shows the effective range of the flash in P-TTL, TTL and auto modes *Auto-focus assist beam for focusing in low light or low contrast situations *Uses 4 AA batteries *Includes case Approximate Dimensions (L x W x H):8.3000 x 3.7000 x 3.6000 UPC Code: 027075116269 Brand: Pentax